Demco 800 BUSHEL Dokumentacja Pobierz pdf (Strona 9)

Page 9

910

RUNNING GEAR BRAKE LINE PARTS BREAKDOWN

1. Assemble the running gear.

2. Mount the Rear Brass Tee (#4) onto the bolt welded to the top of the rear

bolster frame using one 5/16" nylon insert locknut (#13).

3. Next attach the 52" Rubber Line (#1) to the orifice fitting on the

master cylinder (see page 8).

4. Attach Brake Tee (#2) to the 52" Rubber Brake Hose(#2). Attach

the 53" Steel Brake Line (#9) to the Brake Tee (#2), and bend the

53" Steel Line (#9) around the front bolster frame to fit (as shown).

NOTE: When bending steel lines, form around a 3/4" diameter pin,

be careful not to make the bend too sharp or line failure will occur.

5. Attach 8" Steel Brake Line (#3) to Brake Tee (#2), and to Brass Tee

(#4). Attach 20" and 41" Steel Brake Lines (#5 & #6) to Brass Tee

(#4). Attach 18" Rubber Brake Hose (#7) to lines #5 and #6 and to

Front Brake Clusters (Refer To Diagram Above). Now attach the

rubber Brake Line Clips (#8).

REF. PART

NO. NO. QTY. DESCRIPTION

BRAKE LINE PARTS LIST

1. 05979 1 #6 x 52 Rubber Line

*2. SB7900 1 Brake Tee

*3. SB508 1 3/16" x 8" Steel Brake Line

*4. SB7785 2 Brass Tee

*5. SB520 1 3/16" x 20" Steel Brake Line

*6. SB541 1 3/16" x 41" Steel Brake Line

*7. 05982 2 18" Rubber Brake Hose

*8. SB7764 2 Rubber Brake Line Clip

9. SB553 3 3/16" x 53" Lg. Steel Line

10. 02549 10 Rubber Protector (for steel lines)

11. SB13H66 1 Lg. Rubber Line w/ solid F. end (2x)

12. SB580 1 3/16" x 80" Steel Brake Line

13. 02802 2 5/16"-18 UNC Nylon Insert Locknut

14. B64 H 1 Hose Clamp

6. Assemble 53" Rear Steel Lines (#9) to the brake cluster first. Then

bend around the top of the rear bolster frame and attach to the Rear

Brass Tee (#4) as shown. Now attach 80" Steel Lines (#12) to cen-

ter of outlet on Brass Tee (#4) along reach pipe.

7. Assemble 12" Rubber Line (#11) between the 80" Steel Line (#12),

and the 53" Steel Front Brake Line (#9) allowing some slack. Hold

80" line in place with clamp (#14).

8. Put Rubber Line Protectors (#10) around steel lines at clips and bend

clips down.

Please order replacement parts by PART NO. and DESCRIPTION

* Optional front brakes on 550 bushel wagon.

Note: Front brakes are optional

on the 550 bushel running gear.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag

Demco 800 BUSHEL Dokumentacja Strona 9

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Demco 800 BUSHEL